background image

Setup Instructions

ONLINE TENT STORE

Flex 10m x 10m

6.  Pound in the stakes at a 45° angle, facing away 

from the tent, to maximize grip. Side stakes 

should be set at distance equal to 75% of the 

height of the side pole. Corner stakes should be 

set at a distance equal to the height of the pole. 

Corners require 2 guy lines – stake them out in 

line with each the edge of the tent – so they form 

a 90° angle.

7.  Attach the straps with the tensioning buckles to 

the pegs but leave the guy ropes very loose.

8.  If you’re using storm lines: lay them out over the 

tent fabric. (It’s a lot harder throwing them over 

a pitched tent.) A storm line runs from its peg, al-

ong a guy rope, through the side clamp, over the 

tent, through a side clamp on the opposite side, 

along a guy rope, to a peg.

9.  Push up the Corner Poles and tension the guy 

lines. The corner poles must remain standing to 

add the rest of the poles.

10.  Push up the side poles. Raise them symmetrically 

– two at a time – starting from one end of the tent 

and working toward the other end. Tighten the 

guy lines softly.

11.  Push up the center poles.
12.  Tension the guy lines by pulling the loose end of 

the guy lines through the tensioners. Work sym-

metrically – as you add tension to one guy line – 

add tension to the corresponding guy line on the 

opposite side of the tent. Firm and even tension is 

the goal. Don’t overdo it!

Summary of Contents for Flex 10m x 10m







Reviews: