![background image](http://html1.mh-extra.com/html/canvas/sydney-088-2214-2/sydney-088-2214-2_assembly-instructions-manual_3977867007.webp)
• Check all screws and nuts periodically for tightness, tightening them
again as required.
• Disassemble the swing in the reverse order of the assembly steps.
• Always disassemble the swing completely. A partially disassembled
swing is not stable enough to resist wind and bad weather, and therefore
can be damaged and/or cause damage.
• Clean the swing with mild soap and water. Rinse thoroughly, and wait
until the swing is completely dry before reassembling it.
CAUTION!
• Always use a mild soap—never detergent.
- Water should be cold to lukewarm—never more than 25°C (77°F).
• Steel components of garden accessories and furniture are treated with
rust-inhibiting paint. However, due to the nature of steel, surface oxidation (rusting)
will occur if this protective coating is scratched. This is a natural process. To minimize
this condition, it is recommended that care be taken when assembling and handling
the product in order to prevent the paint from being scratched. Surface rust can be
removed easily using a very light application of common cooking oil. If surface
oxidation (rusting) occurs and no measures are taken to correct it, the oxidation may
start dripping onto the assembly surface, which may cause damaging stains that may
lt to remove.
Dimensions (DIA x H)
Product weight
Weight capacity
41 3/8 x 77 1/8"
105 x 196 cm
66 lb 2 oz
30 kg
225 lb
102 kg
12
13
Model No. 088-2214-2
ASSEMBLY ASSEMBLY
Step 6
Requires
C, F
Open the hook of the safety rope on the seat frame (F) and pass
through the bottom of the lower hanging bar (C). Then tighten the
hook of safety rope.
F
CLEANING AND MAINTENANCE
SPECIFICATIONS