8
9
Model No. 088-2214-2
ASSEMBLY ASSEMBLY
ASSEMBLY ASSEMBLY
Step 2
Requires
A, B ,C, H, I, N, O, P, U, V
1. Attach the lower hanging bar (C) to the left base (A) and right base
(B) by lining up the bolt holes on the lower hanging bar (C) with the
corresponding bolt holes on the left base (A) and right base (B).
2. Using M8x20 combination bolt and washer (I), M8 washer (N) and M8
nut (P), lightly tighten all bolts using the hex key (U) and wrench (V).
3. Using M8x15mm bolt (H), M8 spring washer (O) and M8 washer (N),
lightly tighten all bolts using the hex key (U).
4. Tighten all bolts.
Step 3
Requires
C, D, G, N, P, R, S, U, V, X
1. Connect the upper hanging bar (D) and lower hanging bar (C) by using post plastic
part (S).
2. Using M8x55 bolt (G), M8 washer (N) and M8 nut (P), tighten all bolts using the hex
key (U) and wrench (V). Add M8 screw cover (X) as shown below.
D
S
G
N P
P
G
N
S
X
X
R
R
C
NOTE:
Do not completely tighten.
NOTE:
Do not
completely tighten.
H
N
O
I
H
N
P
P
N
C
B
A
