background image

IMPORTANT SAFETY INSTRUCTIONS

3

PRODUCT NO. 000-0000-0  |  MODEL NO. 151-3568

USE AND CARE INSTRUCTIONS

•  When the product is placed on a live tree, the tree should be well maintained and fresh. Do not place on live 

trees with needles that are brown or break off easily. Keep the tree holder filled with water.

•  If the product is placed on a tree, the tree should be well secured and stable.
•  Before using or reusing, inspect product carefully. Discard any products that have cut, damaged, or frayed 

wire insulation or cords, cracks in the LED holders or enclosures, loose connections or exposed copper wire.

•  When storing the product, carefully remove the product from wherever it is placed, including tree branches, 

or bushes to avoid any undue strain or stress on the product conductors, connections, and wires.

•  When not in use, store neatly in a cool, dry location protected from sunlight.

CAUTION

•  This lighting string is rated 6 Volt DC.
 

Do not replace or modify any connectors on this product. Discard product if connector is damaged. Make 
sure connectors are fully inserted and any connector rings are twisted until completely secured such that the 
ring can no longer be turned and the two portions of the connector are completely assembled.

•  Do not use a dimmer switch or install any additional Christmas lighting or ornamentation that is powered by 

a light bulb socket. Doing this may result in damage to your light string or cause personal injury. This action 
will result in a void of the limited warranty of this product.

This Class [B] digital apparatus complies with Canadian ICES-005.

CAUTION

•  Do not operate this product while it is still in the packaging.
•  Battery is to be inserted with the correct polarity.
•  Replace only with 27A 12V battery.
•  Exhausted battery is to be removed from the battery holder.
•  The supply terminals are not to be short circuited.
•  Do not throw battery into fire.
•  Battery should never be left in the product when not in use for long periods of time.
•  Never allow any plastic part to come in contact with a source of heat or flame.
•  This is a Christmas decoration. This is not a toy. Keep out of the hands of small children.

DISPOSAL AND RECYCLING

 

Waste electrical products should not be disposed of with household waste. Please recycle where facilities 
exist. Check with your local authority or retailer for recycling advice. This applies to the battery as well.

Summary of Contents for PIXEL-NM














Reviews: