Canvas 088-1682-2, Assembly Instruction Manual

Page: 7 / 14

ASSEMBLY
Step 3
Requires 1, 2, 4, E, L.
Insert two long top crossbars 4 into the holes at the top of each leg. Line up the
holes. For each hole insert a bolt E through a metal washer L , through the leg,
and secure into the long top crossbar 4 . Do not tighten completely. Repeat
procedure for the other long top crossbar.
7
Step 4
Requires 4, 5, G, J, L.
Attach a short top crossbar 5 onto the long top crossbars 4 . Make sure the U-shaped
brackets of the short top crossbar 5 are facing down. Line up the holes. For each
hole, insert a bolt G through a metal washer L , then through the outer side of the
bracket on the short top crossbar 5 , the long top crossbar 4 , the inner side of the
bracket on the short top crossbar 5 , another metal washer L , and secure with a
nut J . Do not tighten completely. Repeat procedure for the other side.
G
Not actual size.
E
L
Not actual size.
J
L
1
4
4
4
1
2
2
1
2
L
E
4
L
G
L
J
5
4
4
5
5
4