FIRE TABLE OF RIDEAU 5-PC FIRE DINING SET
6
IMPORTANT SAFETY INFORMATION AND PRECAUTIONS
Open the door and inspect the hose assembly and burner prior to each use. If there
is evidence of excessive abrasion or wear or if the hose or burner is damaged, it must
be replaced by an appropriate part from the manufacturer.
Inspect the gas connections of the appliance prior to each use. Do not operate the
unit if there is a gas leak. Have the appliance inspected annually by a qualified service
person.
The pressure regulator and hose assembly provided with the appliance must be used.
The replacement part must be the same as the part specified by the manufacturer.
For instructions on how to connect the LP-Gas tank and check for leaks, please refer
to “Gas Connection” on page 19 and “Leak Test” on page 20.
Children and adults should be alerted to the hazards of high surface temperatures
and should stay away to avoid burns and prevent clothing ignition.
Young children and pets should be carefully supervised when they are in the area
of the appliance.
Any guard or other protective device removed for servicing the appliance must be
replaced prior to operation.
Clothing or other flammable materials should not be hung from the appliance or
placed on or near the appliance.
Do not use this appliance if any part has been under water. Immediately call a
service technician to inspect the appliance and to replace any part of the control
system which has been under water.
The LP-Gas supply cylinder to be used must be constructed and marked in
accordance with the specifications for LP-Gas cylinders of the U.S. Department of
Transportation (DOT).
The cylinder supply system must be arranged for vapour withdrawal and the cylinder
must include a collar to protect the cylinder valve.
Use only 20 lb (9 kg) LP-Gas cylinders.
Do not burn wood or any other materials in this appliance.
The appliance must be isolated from the gas supply piping system by closing its
individual manual shutoff valve during any pressure testing of the gas supply piping
system at test pressure equal to or less than 1/2 PSI (3.5 kPa).
Other cylinders may be acceptable for use with the appliance provided they are
compatible with the appliance retention means and accompanied by illustration(s)
depicting the cylinder mounted on the appliance using the cylinder retention means
and the point of contact between the cylinder and the retention means.
Properly place the hose out of pathways where people may trip over it or in areas
where they may be subject to accidental damage.
The burner must be replaced prior to the appliance being
put into operation if it is clear that the burner is damaged.
The replacement burner must be the same as the part
specified by the manufacturer.
To clean the appliance, including the burner, please refer
to “Storage and Maintenance” on page 22.
18" (46 cm)
12 1/2" (32 cm)
