![background image](http://html1.mh-extra.com/html/canvas/068-7588-0/068-7588-0_assembly-instructions-manual_3989775006.webp)
6
180º
2
1
3
4
5
Toll-free: 1-888-670-6684 | model no. 068-7588-0
AS
SEM
B
LY
Follow these steps in order to assemble your
furniture using the cam lock system.
Warning! To reduce the risk of serious injury, read the following safety
instructions before assembly.
• Read each section carefully before starting. It is very important that each step is performed in the correct
order. If these steps are not followed in sequence, assembly difficulties will occur.
• Make sure all parts are included. Most board parts are labelled or stamped on the raw edge.
• Work in spacious area, preferably on a carpet, near the place the unit will be located.
• Do not use power tools to assemble your furniture. Power tools may strip or damage the parts.
HELPFUL HINTS
• Identify, sort and count the parts before beginning assembly.
• Compression dowels should be tapped in with a rubber mallet.
• Slides have a lip on the right side only.
• Back panels provide stability and support. Unit may collapse without the back panel installed.
• Clean the product with your choice of furniture polish and a soft cloth. DO NOT USE harsh chemicals or
abrasive cleaners.
• Move your new furniture carefully. Two people are needed to lift and carry the unit to its new location.
• Never push or drag your furniture (especially on a carpet).