30
31
The remote control is powered by two AAA batteries.
NB! First check that the power switch on the robot’s underside is in the ON position. Point the
remote control at the robot vacuum cleaner and use the buttons to control it. If the remote control
is used near the charging station, there is the risk that the signals from the robot vacuum cleaner
will not be correctly understood. This may result in incorrect operation.
MODE – Selection of cleaning function (6)
To select a cleaning programme, press MODE one or more times (until the desired programme is
shown in the display) while the robot is working. 1: Spiral pattern cleaning. 2: Automatic clea-
ning. 3: Edge cleaning. 4: S-pattern cleaning.
PLAN – Timer/schedule (4)
Programming: press PLAN and follow the instructions in the Programming section (pages 12 to
13). To see the set programme in the display, hold the PLAN button down.
HOME – Auto-charging button (5)
Automatic charging: press HOME. The robot vacuum cleaner then locates the charging station
automatically. Press HOME (or ON/OFF) once again and the robot stops where it is.
Direction buttons (2)
Changing cleaning direction: while the robot is operating, you can control its cleaning pattern by
pressing the direction buttons.
Display (1)
Shows your current settings.
