![CANVAC COE4200V User Manual Download Page 14](http://html1.mh-extra.com/html/canvac/coe4200v/coe4200v_user-manual_3980268014.webp)
14
GB
C:
When the timer is running you can press the timer key “ ” at any time to check
the remaining timer duration or reset the timer.
If the heater is turned off or restarted by the thermostat while the timer is running, the
timer will continue to run. It is not affected by stopping or restarting. If the heater is
turned off manually or unplugged while the timer is running, the timer is reset.
Child lock
: To turn on the child lock, press “ ” and “MODE” at the same time for
3 seconds. To turn off the child lock, press “ ” and “MODE” at the same time for 3
seconds
NOTES:
1.
If the child lock is active when the heater is turned on, the heater may be turned
off, but all other operations are invalid (except for child lock release).
The child lock is cancelled when the heater is turned off.
2.
If the child lock function is active in standby mode, all operations are invalid (ex-
cept child lock release).
<Memory function>: When the heater is turned off normally it will resume operation
based on the previous settings when you turn it back on. If the power is turned off
and the heater is turned off; the heater will also resume operation based on the pre-
vious settings when the power is turned back on. If you turn off the heater normally
and turn off the power; when you turn the power back on and restart the heater it
will use the default settings, namely high mode, with a set temperature of 35oC.
Note: After a power failure, the child lock is turned off.
<Thermal protection>: If the indoor temperature (Th) exceeds 50°C, all output com-
mands are terminated, the heater beeps urgently 10 times and the digital screen dis-
plays “FF” for 75 seconds at 1 Hz, whether in standby mode or powered on. Even
if the indoor temperature drops below 50 °C, the heater cannot be turned on again
until the thermal protection is reset. To do this you must unplug the power cord, then
plug it back in and turn on the heater.
Turning off
Stäng av värmeelementet och dra ut nätsladdens stickkontakt från vägguttaget.
Flytta värmeelementet
Stäng av värmeelementet och dra ut stickkontakten ur vägguttaget. Nu kan du flytta
värmeelementet genom att rulla det på hjulen.
Moving the heater
To move the heater, turn it off first, unplug it from the power socket, then push the
heater body so that it rolls on the four castors.