12
GB
Installing the castor assembly
1. Place the heater body upside down so that
the base is facing upwards.
2. Connect and tighten the two wheel carrier
plates to the body with the butterfly nuts as
shown in the figure.
3. After fitting, turn the heater the right way up,
so that the wheels are on the ground.
LOCATION OF PARTS
Use of oil-filled heater
Display window
Castor assembly
Control box
Cord wrap
Control button
Fin
7 fins heater castor assembly
9\11\13 fins heater castor
assembly
9. Correct disposal of this product
This marking indicates that this product should not be disposed of with other household waste
throughout the EU. To prevent possible harm to the environment or human health from uncon-
trolled waste disposal, recycle it responsibly to promote the sustainable reuse of material re-
sources. To return your used device, please use the appropriate return and collection systems or
contact the retailer where the product was purchased. They can take this product for environme-
ntally safe recycling.
