Innovative Lighting Products
Followspot Operating Instructions
V 1.1 4/19/22
8
1092 West Atlanta Street, SE • Suite 600 • Marietta, GA 30060 • 888-252-5912 •
• cantousa.com
10 MENU:
There are fourteen different menus to control the settings of ASTRO RGBW LED. The rotary selector is used to adjust the
settings and to navigate through the menu. Turn left or right to select the menu and push to access or to confirm the selected
data or functions. To exit the selected menus without saving the data, press the rotary selector for at least 1 second.
10.1 WI-FI, DMX OR MANUAL (MODE):
Color control of the Astro is achieved through a totally innovative technology. The Astro Wi-Fi generates a proprietary Wi-Fi
access which will recognize one device only and whose range reaches 15m approximately in obstacle-.free environments.
Access to the Wi-Fi access is protected by password. A universal mobile phone holder (3.5/6.5in), rotatable over 360°,
supplied with the Astro and clamped on one of the side bars, allows the installation of a mobile device, either IOS or
Android to take control of the followspot.
If the Astro was purchased complete with the Canto USA controller A20702074 (available as an optional accessory)
Smartphone Honor 75 Black, pre-loaded with the Android Art-Net Controller app, relevant settings and libraries, it is ready
to be operated. In case you are using your own mobile device, please refer to chapter 12 and 13 of this manual for all the
necessary steps needed to set up the control system.
Select the LED control mode between Wi-Fi (factory setting – if you want to control the color mixing through a mobile
device), DMX and manual. To change the control mode press once the rotary selector until an arrow appears on the menu.
Turn the selector to the right or the left to select the desired mode of operation and press to confirm your selection.
In order to work properly with an external mobile device the Astro must be set in Wi-Fi mode at the default settings. If default
settings have been changed, please refer to chapter 10.23-B to reset the product to factory settings.
Tap the rotary selector and the LCD screen will display the mode status and the current value: