Innovative Lighting Products
Followspot Operating Instructions
V 1.1 4/19/22
26
1092 West Atlanta Street, SE • Suite 600 • Marietta, GA 30060 • 888-252-5912 •
• cantousa.com
messages. Drag then the Wi-Fi switch to the right and select “Astroxxx” from the list of detected Wi-Fi networks, in order to
connect your device to the Astro network.
Enter the password (default AstroNet) and press join to connect to the network. Once the device is connected, exit from the
Wi-Fi settings and tap on the Luminair icon.
The App will start at the default factory settings, specifically with a Factory Test Project.
By default, Luminair broadcasts Art-Net over the network to Net 0, Subnet 0 and Universe 0. In this scenario, data will be
delivered to all Art-Net interfaces on the local network and then no special configuration should be necessary.
To load the LDR settings which will allow you to control the Astro, please request the