Grand Soleil 40
- 54 -
Warning for the filling operation
•
Avoid the excessive pressures of the water flow.
•
After having filled the tanks, it is advisable to open a tap and discharge a little
quantity of water to reduce the pressure in the tanks.
Pressurized fresh hot and cold water system
•
From the tanks, through connecting alimentary polyethylene pipes, the water supplies the
self-closing watertight located astern of the engine and accessible through the ladder.
•
From the self-closing watertight the water passes through the accumulator tank and enters in
the 5 ways system to serve separately the following:
-
The sink/basin of the bow toilet,
-
The shower tap in the cockpit,
-
The water heater,
-
The sink/basin of the aft toilet,
-
The galley basin.
•
From the water heater the hot fresh water in pressure supplies the 5 ways system:
-
The shower tap of the cockpit,
-
The hot water in-pipe
-
The shower/sink of the aft toilet.
-
The galley basin.
-
The shower/basin of the bow toilet
Instruction
•
Keep the tank filled; if there is no water in the tank, the pressure pump will suck in air
and may be damaged by running load less. If pressure pump running noise continues after
turning off the taps, turn off the switch located on 12Vdc Control Panel.
•
After having verified the presence of water, to start the self-closing watertight turn on the
FRESH WATER PUMP switch on the 12 Vdc control panel (see page 45)
•
If you want to use the hot water follow the following:
-
Start the engine (the water heater is automatically activated; water will be hot within 15
minutes)
-
If connected to shore 220Vac network, switch on “Water Heater” located in the 220Vac
control panel (see page 48)
-
Read carefully the water heater charter at the page 33
-
Read also the paragraph dedicated to the 220 Vac network at the page 42
•
Open the desired tap as for domestic use.
