Cantek JEN-60, Operations & Parts Manual, Page: 11 / 37

10 DEC. 2019
Please check and adjust the drive belt every 500 hours using carefully.
Here we are attached the process to replace the drive belt.
First , please take off the red pulley guard (part no:JEN-60-01A-26), as showing
“ A”, and then loosen four Hex. Bolt (part no: JEN-60-01A-17 and 21) , as
showing “B”. By using moving the two hex bolt M8 X80 (part no:
JEN-60-01A-20), showing “C”, it can be easily to removed and install the belt
and adjust the tightness of the belt. After assembly the belt, please tighten up
the four Hex. Bolts and red pulley guard.
Remove Dust Collection Shroud behind Drill Mechanism and blow off with air
by every using.
A
B
B
B
C
C