SRS-12H MANUAL
Chapter 4: SAFETY PRECAUTIONS
22
;
Checks should be made regularly to ensure that there are no foreign objects
jammed in the gaps between the feed chain. Be sure to remove sawdust
from these gaps by an air gun everyday.
;
If the lumber that has not been edged square, the wider side should always
be facedown on the feed chain. Otherwise, the margin of wood will be
fallen because of pressed with pressure rollers and then influence the
accuracy of workpiece.
;
It is dangrous to rip a workpiece which is warped in transverse by put it with
the convex side upward on the feed chain. After pressure rollers press the
warped workpiece, the sawbalde might be clamped by the workpiece and
then cause kickback. The correct ripping method is to place the workpiece
with the convex side
downward
on the feed chain. (see the drawings as
below).
Summary of Contents for C12RSH
Page 5: ......
Page 9: ...SRS 12H MANUAL Chapter 1 Introduction 4 1 3 LOCATION OF PARTS...
Page 12: ...SRS 12H MANUAL Chapter 1 Introduction 7 Machine size...
Page 37: ......
