After making 3 holes to the side
frame guiding holes of the arm
holder, fix the arm holder to the side
frame with driling screws tighten.
(Hole position refer the below
screwing points.∞
After making 3 holes to the side
frame guiding holes of the side frame
fixing bracket≧upper∞
≧under∞, fix the side
frame to the bracket with driling screws
5○16○10 tighten.
Make 3 hole first at the screwing
points. If screw it directly, the
screw head may break. And please
note that if screw it strongly with
the impact driver, the screw will
run idle.
Holder part of the side frame, after
making 5 hole on the top face of
the fin, make 3 hole on the
second fin.
Put the caps onto the side
frame fixing bracket
≧under∞.
After making 3 hole to
the post adjusting the cap
hole on-site, fix the caps
with driling screw
4○10○8.
step1
step1
step2
step3
step2
drilling screw
5×16×10
（parts box）
drilling screw
4×10×8
（parts box）
〈S ingle〉
Screwing points of the arm holder
〈Wide〉
arm holder
side frame
fixing bracket≧under∞
side frame
fixing bracket≧upper∞
side frame
fixing bracket≧under∞
standard position
seal
standard position
seal
side frame
side frame
fix two screws in
the center
fix all six screws
side frame
fixing bracket cap
5
3
note
Fixing S ide Frame
making 3 hole
