16
TIP:
You can reset the settings either by operating inside of the SETUP MENU, or by
restoring defaults.
From now on, UltraDash Z3+C will automatically turn on and start recording
once power has been made available from the 12V outlet. Just start the vehicle
and start driving!
- If there is no 12V outlet or cigarette lighter for your vehi cle, use the included
USB power cable but please notice that your USB power output port should
provide 2A current to make sure the device work properly.
- DO NOT wire UltraDash Z3+C directly to the car cigarette outlet or any 12V
outlet. Doing so will result in permanent damage to the camera.
- You can purchase our hardwire kit from the Cansonic official w ebsite that will
directly connect to your vehicle’s fuse box. This will allow you to have your
12V outlet available for other use.
Please read carefully and follow the instructions below to help you operate
UltraDash Z3+C safely.
First Time Use SD Card Format. Press OK button to format
05:20:43
Please
format SD card
for the
first time using on this device
Format
Cancel
12/25/2022
11:17:01
Summary of Contents for ULTRADASH Z3+C
Page 1: ...INSTRUCTION 2K...
Page 55: ...53...