H1000 Elevator Control
Page 8 of 20
Installation Guide
October 2015 • Rev. 1.7
Master Panel
Slave 1 Panel
1. Dipswitch Settings:
OPT1:
ON
OPT2:
ON
OPT3:
OFF
OPT4:
OFF
1. Dipswitch Settings:
OPT1:
ON
OPT2:
OFF
OPT3:
OFF
OPT4:
OFF
2. Jumper Setting:
2. Jumper Setting:
3. Address Setting:
3. Address Setting:
Panel address is set to the same as Master Panel
Slave 2 Panel
1. Dipswitch Settings:
OPT1:
OFF
OPT2:
ON
OPT3:
OFF
OPT4:
OFF
2. Jumper Setting:
3. Address Setting:
Panel address is set to the same as Master Panel
See Hurricane Operator Guide for more information
.
Edit->Panel Definitions. Select 32, 48, 64 Elevator Floor Board.
Panel address is set to 1 in this example
