Canopus MediaEdge-STB3, Operation Manual

Page: 19 / 24

-13-
MediaEdge
6-2 Playing content - Specifying numbers -
1
Press a numeric button on the
remote controller.
That switches content.
Info:
Enter two-digit numbers to specify the
number of the content to play.
- To specify [01], enter [0][1]
- To specify [11], enter [1][1]
You can enter the content number, by
entering a 1-digit number and then pressing
button, if it’s 1-digit. Also, after a few
seconds have passed since you enter a
1-digit number, the content of that number
will automatically start playing.
6-3 Playing content in numerical sequence
1
While content is playing, press
the
or button on the
remote controller.
The content for any valid number will play.