Canopus ADVC-300, User Manual

Page: 28 / 54

28
Installation (for Windows) Installation (for Windows) Installation (for Windows) Installation (for Windows) Installation (for Windows)
The following describes the procedure for installing Picture Controller
300 on a computer running Windows XP.
* You can install Picture Controller 300 without ADVC-300 connected with the
computer.
Insert the “ADVC-300 Applications CD” into the CD-
ROM drive.
> The CD-ROM automatically starts up and the installation
screen is displayed.
* When the CD-ROM does not automatically start up, run
“ADVC-300 Applications CD” > [PCtrl300] > [Steup.exe].
1
1
Do not remove the “ADVC-300
Applications CD” from the CD-
ROM drive until the installation
is completed.
Tip
Click [Next].
2
2
When the License Agreement is displayed, carefully
read the content and click [Yes] only if you agree to
them. If you do not agree to the License Agreement,
click [No] to stop installation and notify our customer
support personnel in writing.
* If you do not agree to the License Agreement, you can-
not use this software.
3
3