Canon ZR25 MC Instruction Manual Download

Page: 30 / 146

Mastering

the Basics

Built-in speaker

The camcorder has a built-in speaker so you can review the sound track alongside
the picture during tape playback. The built-in speaker is monaural.

Adjust the speaker volume by turning the selector dial.
• Turn the selector dial up to increase the volume, and down to lower the volume.
• A bar appears in the display to indicate the current volume. It disappears in 4

seconds.

• You can turn off the volume completely by turning the selector dial down until

OFF appears.

Notes:

• Sometimes audio may sound distorted when the volume is turned up high. If

this happens, turn down the volume.

• The speaker turns off when the camcorder is set to any mode other than TAPE

PLAY (VCR) mode.

Using the headphones

• You can also use the headphones to monitor the sound track. Change the setting

of the AV/headphones terminal through the menu (

31).

• You can adjust the headphone volume separately from the built-in speaker,

either during TAPE PLAY (VCR) mode or TAPE CAMERA mode. The volume
level is the same regardless of mode.

• The levels you adjust for the built-in speaker and headphones are memorized

separately. The camcorder remembers your levels even if you turn the
camcorder off and back on again.

• The speaker turns off when you use headphones.

Summary of Contents for ZR25 MC



















































































































































Search results

Summary of Contents for ZR25 MC

Reviews:

Related manuals for ZR25 MC

Brands by name

Popular brands

Canon ZR25 MC, Instruction Manual

Search results

Summary of Contents for ZR25 MC

Reviews:

Related manuals for ZR25 MC

Brands by name

Popular brands