manualshive.com logo in svg

Canon ZR25 MC, Instruction Manual

Share
Download
Canon ZR25 MC Instruction Manual Download Page 127

127

E

Additional

Information

Miscellaneous

Cause and/or what to do about it

• The remote sensor mode is set to

OFF

B

in the menu (

46).

• The remote sensor modes of the

wireless controller and the camcorder
itself are different (

46).

• The batteries are dead or not inserted.

• Check the screen displays (

132).

• External interference may cause the

camcorder’s microprocessor to
malfunction temporarily. If random
letters appear in the display or if
normal operation is interrupted,
remove and then replace the power
source.

• Remove the cable and then reconnect

it or turn the power off and back on
again.

• This is not a malfunction.

Problem

?

The wireless controller doesn’t
work.

?

The power indicator is flashing.

?

The camcorder malfunctions.

?

The DV cable is connected
correctly, but there’s nothing in
the display.

?

The camcorder becomes warm
during use.

• The image is protected (

102).

• You are using an SD Memory Card

and it is set for erasure prevention.
Change the position of the protect
switch.

?

The image cannot be erased.

Summary of Contents for ZR25 MC



















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands