You can select the microphone sound to match the recording situation.
* Only available when audio AUDIO DUB. has been set to MIC. IN.
1. Open the VCR SET UP submenu and select MIC.
2. Select the setting and close the menu.
NORMAL:
General recording.
VOICE:
When recording a person’s voice.
W. SCREEN:
In windy places such as the beach or near buildings. Note that low sound may be
reduced together with the wind noise.
54
E
Recor
ding
Audio Recording
The XM2 can record sound in two audio modes:
• 16-bit (48 kHz, 2 channel) for the highest sound quality
• 12-bit (32 kHz, 2 from 4 channels) for recording on two channels (stereo 1), leaving two channels
(stereo 2) free for you to add new sound at a later date.
* Only available when AUDIO DUB. has been set to MIC. IN.
1. To switch the mode, open the VCR SET UP submenu and select AUDIO MODE.
2. Select a mode and close the menu.
• The name of the selected mode is displayed for 4 seconds.
Note:
• For audio output details and how to play back a tape with added sound on stereo 2, see p. 109.
+
,
+
*
PLAY
(VCR)
TAPE
CAMERA
TAPE
AUDIO MODE•• 16bit
VCR SET UP
(
18)
+
,
+
*
PLAY
(VCR)
TAPE
CAMERA
TAPE
Selecting the Audio Mode
Selecting the Built-in Microphone Sound
MIC••••••••••NORMAL
VCR SET UP
(
18)
