Canon XL 2 Page 90 Instruction Manual Download

Page: 90 / 126

Returning to a Pre-marked Position

If you wish to return to a particular scene later, mark the point with the zero set memory, and the tape
will stop at that point when you rewind/fast forward the tape.
This function is operated with the wireless controller.

1. Press the ZERO SET MEMORY button at the point you wish to return to later.

• “0:00:00

” appears.

• To cancel, press the ZERO SET MEMORY button again.

2. When you have finished playback, rewind the tape.

• “

RTN” appears.

• The tape stops automatically at “0:00:00”.
• The tape counter changes to time code.

The zero set memory may not function correctly when the time code has not been recorded
consecutively.

ZERO SET MEMORY
button

PLAY

button

REW

button

STOP

button

Summary of Contents for XL 2































































































































Search results

Summary of Contents for XL 2

Reviews:

Related manuals for XL 2

Brands by name

Popular brands

Canon XL 2, Instruction Manual

Search results

Summary of Contents for XL 2

Reviews:

Related manuals for XL 2

Brands by name

Popular brands