Ad
ditional
Inf
ormation
E
107
Troubleshooting
Cause and/or what to do about it
•
The camera is not switched on (p. 35, 76).
• The cassette is not loaded or is set for erasure
prevention (p. 22-23).
• The tape has reached the end.
• The battery pack is exhausted or not properly
attached (p. 19-20, 98).
• The function cannot be used in that recording
program (p. 47).
• The top controls are locked by the LOCK lever
(p. 101).
• The camera was in record pause mode for more
than about five minutes (p. 35).
• The battery pack is exhausted (p. 98).
• The POWER dial is not set to a recording
program (p. 46).
• The cassette is not loaded or is set for erasure
prevention (p. 22-23).
• The tape has reached the end.
• The POWER dial is not set to a recording
program (p. 46).
• The camera has not been used for a long while,
it is not a malfunction. Switch off the camera.
Take off the battery and reattach it. Then switch
on the camera again.
• You are attempting to play back or record from a
copyright protected cassette (p. 87).
• The tape heads are badly contaminated (p. 105).
• The camera is on manual focus (p. 66).
• The viewfinder lens needs adjusting (p. 17).
• The lens is dirty (p. 105).
Refer to this checklist first if you have any problems with your camcorder. Possible explanations are given
for each problem on the list — turn to the page numbers in brackets for more information.
Make sure that the camera is properly connected if you are using it with a TV or VCR. Consult your dealer
or service outlet if problems persist.
Problem
?
Nothing happens when I press the buttons.
?
The camera turned itself off.
?
The start/stop button doesn’t work.
?
There’s no picture in the viewfinder.
?
There’s a blank blue screen in the display.
?
The camera won’t focus.
Recording/Playback
