E10
2 PREPARATION
E11
2-5 Iris Mode Setting
(Option)
DIP switch (iris control select switch) was set to the “OFF” position at the factory.
See the table below to find the relationship between the position of the switch and signals.
Iris mode
Iris control and operation depend on the following three signals
1
Enforced auto iris command signal from the camera system (IRIS ENF)
(Some camera models are not capable to provide this signal.)
2
AUTO/REMOTE iris command signal from the camera system (IRIS A/R)
3
Setting position of DIP switch inside the lens body (Refer to the table under “Trimmer Adjustment” on the previous
page.)
(“ON” position: I.LOCAL/“OFF” position: I.CAMERA However, I.LOCAL may not be usable depending on the
specifications.)
The table below lists the relationship between these three signals and iris mode.
Position of the DIP switch
Command signal from camera
Iris Control signal from
Iris mode
IRIS ENF
IRIS A/R
OFF
ON
Auto
Camera
Auto iris
OFF
ON
Remote
Camera
Remote iris
OFF
OFF
Auto
Camera
Auto iris
OFF
OFF
Remote
Camera
Remote iris
ON
ON
Auto
Camera
Auto iris
ON
ON
Remote
Camera
Remote iris
ON
OFF
Auto
Switch box
Remote iris
ON
OFF
Remote
Switch box
Remote iris
DIP switch
Summary of Contents for XJ27x6.5B AF
