Canon XH A1S Instruction Manual Download Page 108

Page: 108 / 155

108

(frame advance)

Plays back frame-by-frame. Repeatedly press the

button on the wireless controller during playback

pause. Hold the button pressed down to enter the continuous frame advance playback.

(slow forward)

Plays back at about 1/3 normal speed. Press the SLOW

button on the wireless controller during normal

or reverse playback. Press the

(play) button to return to normal playback.

(playback pause)

To pause playback, press the

button on the camcorder or the PAUSE

button on the wireless controller

during normal playback.

(rewind playback) /

(fast forward playback)

Plays back the tape at 9.5x normal speed (forward or reverse). Press down and hold the

button

on the camcorder or the REW

or FF

button on the wireless controller during normal playback,

rewind or fast forward to enter the fast playback.

(frame reverse) /

(frame advance)

Plays back frame-by-frame. Press the

button on the wireless controller repeatedly during

playback pause. Hold the button pressed down to enter the continuous frame advance/reverse playback.

(slow reverse) /

(slow forward)

Plays back at about 1/3 normal speed. Press the SLOW

button on the wireless controller during normal

or reverse playback. Press the

(play) button to return to normal playback.

(reverse playback)

Press the

button on the wireless controller during normal playback. Press the

(play) button to return

to normal playback.

x2 (reverse x2 playback) / x2

(forward x2 playback)

Plays back at 2x normal speed. Press the

button on the wireless controller during normal or reverse

playback. Press the

(play) button to return to normal playback.

Adjusting the Volume of Headphones or the Built-in Speaker

Turn the SELECT/SET dial to adjust the volume.

To turn off the volume, keep the dial turned down until the volume icon changes to [OFF

The sound will be muted during special playback modes.

The picture may become distorted during some special playback modes.

The camcorder stops the tape automatically after 4 minutes 30 seconds in playback pause mode
to protect the tape and video heads.

During fast forward playback, rewind playback and reverse playback of a tape recorded in HDV
standard, the picture may be distorted.

The picture may be slightly distorted at the switch point between recordings in HDV and DV
standards on the tape.

Summary of Contents for XH A1S




























































































































































Search results

Summary of Contents for XH A1S

Reviews:

Related manuals for XH A1S

Brands by name

Popular brands

Canon XH A1S, Instruction Manual

Search results

Summary of Contents for XH A1S

Reviews:

Related manuals for XH A1S

Brands by name

Popular brands