Canon XF400, Instruction Manual

Page: 121 / 164

121
Connecting to a Wired (Ethernet) Networ k
Connecting to a Wired (Ethernet) Network
Connect the camcorder to a router or other device connected to a wired (Ethernet) network using a
commercially available Ethernet cable. Use Category 5e or better, shielded twisted pair (STP) Ethernet cables
compatible with Gigabit Ethernet (1000BASE-T) and with good shielding capability.
1 Connect a commercially available Ethernet cable to t he (Eth ernet) terminal on the camcorder and
an Ethernet port on a networ k device.
2 S elect [Connection S etting s ].
>
[
B
!
System Setup]
>
[Network Settings]
>
[Connection Settings]
3 S elect the de s ired networ k configuration profile and then s elect [Ethernet].
Network configuration profile ([1:] to [4:])
>
[
i
]
>
[Edit]
>
[Ethernet]
• You can save up to 4 network configuration profiles in the camcorder. If necessary, touch [
Í
]/[
Î
] to scroll
up/down.
4 Continue with the procedure to configure the IP addre ss a ss ignment (
A
117).
Operating modes:
Ethernet access indicator
Ethernet cable
(commercially available)
Ethernet port on a
network device
(Ethernet) terminal