background image

73

S

etting the U

s

er Bit

Setting the User Bit

The user bit can be selected from the date or the time of recording, or an identification code consisting of 
8 characters in the hexadecimal system. There are sixteen possible characters: the numbers 0 to 9 and the 
letters A to F. The user bit is recorded with XF-AVC clips and can be output from the SDI OUT terminal 
(

z

only) and HDMI OUT terminal.

Setting an Hexadecimal Code

1 Open the [U

s

er Bit 

S

etting

s

s

creen.

 

>

 [

3

 

#

 Recording Setup] 

>

 [User Bit Type] 

>

 [

 Setting] 

>

 [

i

]

• The user bit setting screen appears with an orange selection frame on the leftmost character.

• Select [Reset] to reset the user bit to [00 00 00 00] and return to the previous screen.

2

S

elect a character you want to change and then 

s

elect [

Î

] or [

Í

] to change it a

s

 nece

ss

ary.

• Change the rest of the characters in the same way.

3

S

elect [OK] and then 

s

elect [

X

].

• Select [Cancel] to close the screen without changing the user bit.

Using the Date or Time

1

S

elect [U

s

er Bit Type].

 

>

 [

3

 

#

 Recording Setup] 

>

 [User Bit Type]

2

S

elect [

 Date] or [

 Time] and then 

s

elect [

X

].

NOTES

NOTES

• The user bit will not be recorded with MP4 clips recorded to the card.

Operating modes:

Summary of Contents for XA70



























































































































































Reviews: