Canon XA20 Instruction Manual Download Page 23

Page: 23 / 187

Charging the Battery Pack

• Charged battery packs continue to discharge naturally. Therefore, charge them on the day of use, or

the day before, to ensure a full charge.

• The first time you use a battery pack, fully charge it and then use the camcorder until the battery

pack is completely exhausted. Doing so will ensure that the remaining recording time will be
displayed accurately.

• We recommend that you prepare battery packs to last 2 to 3 times longer than you think you might

need.

•

USA and Canada only

: The Lithium ion/polymer battery that powers the product is

recyclable. Please call 1-800-8-BATTERY for information on how to recycle this
battery.

COP

Summary of Contents for XA20




























































































































































































Search results

Summary of Contents for XA20

Reviews:

Related manuals for XA20

Brands by name

Popular brands

Canon XA20, Instruction Manual

Search results

Summary of Contents for XA20

Reviews:

Related manuals for XA20

Brands by name

Popular brands