Part Names
36
Input Terminal
(1) Terminal for wired remote control (REMOTE) (
)
Connects to an optional wired remote control (RS-RC05).
(2) AUDIO IN terminal (AUDIO IN) (
)
Receives the audio signal input for 2 kinds of image input other than HDMI.
The internal speaker outputs the audio for the selected image signal.
(3) AUDIO OUT terminal (AUDIO OUT) (
)
Outputs audio to an external speaker or other audio equipment. This outputs
the audio signal that corresponds to the projected image signal.
(4) USB port (
Connects a USB flash drive. Used for projection of images on a USB flash
drive, or for firmware updates.
(5) Analog PC-1 / DVI-I input terminal (
)
Connects the external monitor output from a computer.
Receives analog and digital PC signals (Analog PC-1 and Digital PC,
respectively).
(6) Analog PC-2 / COMPONENT input terminal (
Receives the analog PC signal (Analog PC-2).
A component cable can be used to receive the component image signal
(Component).
(7) HDMI input terminal (HDMI) (
Receives digital video signals (HDMI).
Carries both video and audio signals across a single cable.
(8) LAN port (
)
Connects the LAN cable (shielded twisted pair).
Used to connect the projector to a network.
(9) Service port (CONTROL)
It is not used during ordinary use.
(2)
(1)
(3)
(4)
(5)
(6)
(7)
(8)
(9)