![background image](http://html.mh-extra.com/html/canon/wux6000/wux6000_user-manual_62623186.webp)
Completing Computer Settings
186
Setting Projector Information [Projector info.]
From [Projector info.] in the settings screen, you can enter relevant comments such
as projector names and locations where projectors are installed so that the
information can be used to identify projectors when multiple projectors are installed
on the network. For the setting procedure, refer to “Network Setting” (
Item
Explanation
Factory default setting
SNMP
Select the SNMP function version. If
OFF is selected, the SNMP function
will be turned off and the other
settings in this screen cannot be
changed.
OFF
Receive community
Enter the community name which will
receive projector information in 1-byte
alphanumeric characters and symbols
(1 - 15 characters).
<Blank>
Password
Enter the community settings
password in 1-byte alphanumeric
characters and symbols (8 - 15
characters). It can be set only when
the SNMP version is V3.
<Blank>
Confirm password
For confirmation, enter the same
password as you entered in
[Password].
<Blank>
Item
Explanation
Factory default setting
Projector name
Enter the projector name in 1-byte
alphanumeric characters and
symbols (1 - 63 characters).
Canon Projector001
Comment
Enter any relevant notes, such as where
the projector is installed.
<Blank>
Some characters such as # cannot be used for [Projector name] and [Comment].