![background image](http://html1.mh-extra.com/html/canon/wux450/wux450_user-commands_4202421045.webp)
WUX450 / WX520 / WUX400ST / WX450ST
User Commands
- 42 -
MAIN
Unit control panel emulation
Format
Setting
Command
MAIN=<Side control emulation button parameters:ID>
Response i:OK
Reference
Command -
Response -
Note: See "Error list" for any response other than the above.
< Side control emulation button parameters:ID >
Parameter
Meaning
Operation
Remarks
POWER
POWER
POWER_OFF
-
POWER button pressed twice
MENU
MENU
INPUT
INPUT
AUTOPC
AUTOPC
KEYSTONE
KEYSTONE
UP
UP
UP+REP Button
press
start
DOWN
DOWN
DOWN +REP
Button press start
LEFT
LEFT
LEFT +REP
Button press start
RIGHT
RIGHT
RIGHT +REP
Button press start
OK
OK
*-REP
-
Button press end
Environment
Power mode restriction
Input
LAN
RS-232C
SL0
SL1
SL3
ON
ST
ON
D-RGB A-RGB COMP
HDMI
LAN
USB
None
No Yes
Yes
Yes
Yes
Yes
Yes Yes Yes Yes Yes Yes Yes
Remarks
(1) Parameters with "+REP" indicates "Button press start" (same state as when the front panel
button is held down).
Be absolutely sure to send the '*-REP' parameter, and end the button pressing last of all.
The button pressing is ended in the cases below as well.
<1> When buttons on the panel or the remote are operated
<2> When some command has been received
(2) When ceiling mount setting is made, functions of UP/DOWN/LEFT/RIGHT buttons on the
unit control panel are reversed. But the "MAIN" command's UP/DOWN/LEFT/RIGHT are
unaffected and always work in the same way as when installed on the floor.
(3) Adjust the time between each button press using the application.
(4) When a button press request is accepted properly, the projector returns "i:OK" even when the
function is inexecutable.
(5) All parameters except "Power" are invalid during standby mode.