WUX450 / WX520 / WUX400ST / WX450ST
User Commands
- 20 -
AMBADJ
Ambient light adjustment / OFF
Format
Setting
Command
AMBADJ=<Ambient light correction adjustment parameter:ID>
Response i:OK
Reference
Command GET=AMBADJ
Response
g:AMBADJ=<Ambient light correction adjustment parameter:ID>
Note: See "Error list" for any response other than the above.
< Ambient light correction adjustment parameter:ID >
Parameter
Meaning
OFF Turned
off
ON Adjusted
Environment
Power mode restriction
Input
LAN
RS-232C
SL0
SL1
SL3
ON
ST
ON
D-RGB A-RGB COMP
HDMI
LAN
USB
None
No No No Yes No Yes
Yes Yes Yes Yes Yes Yes Yes
Remarks
(1) "Ambient light level" and "Ambient light type" settings take effect on the displayed image
when "Ambient light correction" is activated.
To adjust the "Ambient light level" or "Ambient light type", use "AMB_LEVEL" or
"AMB_TYPE" command, respectively.
(2) This sets the currently selected input signal and image mode.
AMBLEVEL
Ambient light level settings
Format
Setting
Command
AMBLEVEL=<Ambient light level settings parameter:ID>
Response i:OK
Reference
Command GET=AMBLEVEL
Response
g:AMBLEVEL=<Ambient light level settings parameter:ID>
Note: See "Error list" for any response other than the above.
< Ambient light level settings parameter:ID >
Parameter
Meaning
OFF Weak
ON Strong
Environment
Power mode restriction
Input
LAN
RS-232C
SL0
SL1
SL3
ON
ST
ON
D-RGB A-RGB COMP
HDMI
LAN
USB
None
No No No Yes No Yes
Yes Yes Yes Yes Yes Yes Yes
Remarks
(1) This sets the currently selected input signal and image mode.