![background image](http://html1.mh-extra.com/html/canon/wux10-realis-wuxga-lcos-projector/wux10-realis-wuxga-lcos-projector_user-manual_4036063036.webp)
Connecting the Projector
36
BNC cable (Input signal type: [ANALOG PC-2] -
)
■
Connecting to DVI Monitor Output Terminal (digital connection)
DVI cable (Input signal type: [DIGITAL PC] -
• It cannot project a signal whose dot clock is 170MHz or higher.
• Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor
turns down the sound.
Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor
turns down the sound.
Monitor output
terminal
(mini D-sub 15-pin)
Audio output terminal
(AUDIO OUT)
To input a corresponding audio signal:
Commercial audio cable
Commercial BNC cable
To AUDIO IN
To ANALOG PC-2/
COMPONENT IN
Computer
Projector
mini D-sub 15-pin – BNC
Terminal Convert Cable
(commercial item)
mini D-sub 15-pin – BNC
Terminal Convert Cable
(commercial item)
Monitor output
terminal
(DVI terminal)
Audio output terminal
(AUDIO OUT)
DVI digital cable (LV-CA29, option)
To input a corresponding
audio signal:
Commercial audio cable
To ANALOG PC-1/
DVI-I IN
To AUDIO IN
Computer
Projector