Canon WFT-E4A Page 89 Instruction Manual Download

Page: 89 / 108

Responding to Error Messages

ubleshooting

This error occurs if, for some reason, the transmitter fails to receive confirmation
from the FTP server that image file transfer is complete.

Restart the FTP server and camera and send the images again.

Are any obstacles blocking the line of sight between the transmitter and the
antenna of the wireless LAN device?

Move the antenna to a position clearly visible from the point of view of the transmitter.
(p.93)

What to check on the transmitter

On the transmitter, does the SSID setting match that of the wireless LAN device?

Check the SSID on the wireless LAN device, and configure the same SSID on the
transmitter. (p.21)

What to check on the wireless LAN device

Is the wireless LAN device on?

Turn on the wireless LAN device.

On wireless LAN devices supporting IEEE 802.11a, are the device settings locked
on IEEE 802.11a?

Configure the wireless LAN device to allow access via IEEE 802.11b and g.

If you are filtering by MAC address, did you register the transmitter’s MAC address
on the wireless LAN device?

What to check on the transmitter

Is the transmitter configured for communication in infrastructure mode?

Configure the transmitter for communication in ad hoc mode.

What to check on the wireless LAN device

Is there a nearby wireless LAN device for ad hoc communication?

Prepare a wireless LAN device for ad hoc communication near the transmitter.

47: Image file transfer completion not confirmed by FTP server

61: Same SSID wireless LAN terminal not found

62: No response from wireless LAN terminal

COP

Summary of Contents for WFT-E4A













































































































Search results

Summary of Contents for WFT-E4A

Reviews:

Related manuals for WFT-E4A

Brands by name

Popular brands

Canon WFT-E4A, Instruction Manual

Search results

Summary of Contents for WFT-E4A

Reviews:

Related manuals for WFT-E4A

Brands by name

Popular brands