50
If you think there is a problem with the WFT-E1, first read the probable causes below. Also
read the troubleshooting section in your camera’s instruction manual.
¡
Your personal computer does not meet the software’s operating requirements.
a
Use a personal computer that meets the software’s operating requirements.
¡
The battery is exhausted.
a
Recharge the battery.
¡
The battery is not installed properly.
a
Install the battery properly (p.22).
¡
The battery is not fully charged.
a
Recharge the battery fully.
¡
The battery’s service life has ended.
a
Replace the battery with a new one.
¡
Auto power off is in effect.
a
Turn on the <
5
> switch again or disable the auto power off function (p.32).
¡
The battery is almost exhausted.
a
Recharge the battery.
Troubleshooting Guide
Software
The software does not startup.
Power Source
The <
3
> lamp does not turn on when you turn on the <
5
>
switch.
The battery becomes exhausted quickly.
The power turns off by itself.
<
R
> blinks on the LCD panel.
Summary of Contents for WFT-E1
Page 1: ...Wireless File Transmitter WFT E1 E INSTRUCTION MANUAL...
Page 49: ...49 5 5 Reference...
Page 54: ...54...
