Canon VIXIA HF S20, Instruction Manual

Page: 180 / 219

180 Š
Additional Information
Noise can be heard along with the recorded sound
- When recording sound with an external microphone, the interference caused by wireless
communications may be picked up and recorded as noise. We recommend turning off the
wireless communication while recording (
0
151).
Sound is distorted or is recorded at lower levels.
- When recording near loud sounds (such as fireworks, shows or concerts), sound may become
distorted or it may not be recorded at the actual levels. Activate the microphone attenuator
(
0
158) or adjust the audio recording level manually (
0
83).
The picture is displayed correctly but there is no sound from the built-in speaker.
- Speaker volume is turned off. Adjust the volume.
- If the STV-250N Stereo Video Cable is connected to the camcorder, disconnect it.
- The AV terminal is set to headphone output. Set
8
8
[AV/Headphones] to [AV]
.
Memory Card and Accessories
Cannot insert the memory card.
- The memory card was not facing the correct direction. Turn the memory card over and insert
it.
Cannot record on the memory card.
- The memory card is full. Delete some recordings (
0
57, 106) to free some space or replace
the memory card.
- Initialize the memory card (
0
40) when you use it with the camcorder for the first time.
- The LOCK switch on the memory card is set to prevent accidental erasure. Change the posi-
tion of the LOCK switch.
- A compatible memory card must be used to be able to record movies on a memory card
(
0
36).
- The folder and file numbers have reached their maximum value. Set
8 8
[Photo Num-
bering] to [Reset] and insert a new memory card.
The wireless controller will not work.
- Set
6
8
[Wireless Remote Control] to [On].
- Replace the battery of the wireless controller.
CO
PY