manualshive.com logo in svg

Canon VIXIA HF S20, Instruction Manual

Share
Download
Canon VIXIA HF S20 Instruction Manual Download Page 163

Additional Information

 

Š

 163

[Auto Rotate]:

 Photos that were recorded in portrait orientation (by turning 

the camcorder on its side), will be rotated automatically and displayed 
correctly during playback.

[Photo Review Time]:

 Selects the time to display a photo after it has been 

recorded.
• The review time can only be set when the drive mode is set to 

[

A

Single].

[Photo Numbering]:

 Select the photo numbering method to be used on a 

new memory card. Photos are automatically assigned consecutive num-
bers from 0101 to 9900, and stored in folders containing up to 100 pho-
tos. Folders are numbered from 101 to 998.
[

a

Reset]: Photo numbers will restart from 101-0101 every time you 

insert a new memory card.
[

b

Continuous]: Photo numbers will continue from the number following 

that of the last photo recorded with the camcorder.
• If the memory card you insert already contains a photo with a larger 

number, a new photo will be assigned a number one higher than that of 
the last photo on the memory card.

• We recommend using the [

b

Continuous] setting.

• The photo number indicates the name and location of the file on the 

memory card. For example, the file name of a photo numbered 101-
0107 is “IMG_

0107

.JPG”, stored under the folder “DCIM\

101

CANON”.

[USB Connection Type]:

 Select the connection protocol to use when con-

necting the camcorder to an external device using the supplied USB 
cable.
[

M

DVD Burner]: To connect exclusively to the optional DW-100 DVD 

Burner.
[

N

Computer/Printer]: To connect to a computer, printer or similar USB 

peripheral.
[

V

Connect and Set]: To make the selection from a screen that 

appears at the time of the connection to the external device.

CO

PY

Summary of Contents for VIXIA HF S20




























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands