Canon VIXIA HF M40 Quick Manual Download Page 218

Page: 218 / 266

168

Additional Information

Cannot copy scenes/photos

- You may not be able to copy scenes/photos recorded or edited using another device.

Cannot mark individual scenes/photos in the index screen with a checkmark

- You cannot select more than 100 scenes/photos individually. Select the [All Scenes] or [All

Photos] option instead of [Select].

Indicators and Onscreen Displays

lights up in red.

- Battery pack is exhausted. Replace or charge the battery pack.

appears on the screen.

- The camcorder cannot communicate with the battery pack attached so the remaining battery

time cannot be displayed.

lights up in red.

- A memory card error occurred. Turn off the camcorder. Remove and reinsert the memory

card. Initialize the memory card if the display does not change back to normal.

- The memory card is full. Replace the memory card or delete some recordings (

61, 123)

to free some space on the memory card.

Even after stopping recording, the ACCESS indicator does not go off.

- The scene is being recorded in the memory. This is not a malfunction.

appears on the screen.

- The camcorder has become hot while in the [Underwater] or [Surface] recording program.

Turn off the camcorder and let it cool down.

The red ON/OFF (CHG) indicator flashes rapidly (

one flash at 0.5-second

intervals).

- Charging has stopped because the compact power adapter or the battery pack is faulty. Con-

sult a Canon Service Center.

The red ON/OFF (CHG) indicator flashes very slowly (

one flash at 2-

second intervals).

- The temperature of the battery pack is outside its operating range (approximately 0 – 40 °C

(32 – 104 °F)). Remove the battery pack, warm it or let it cool down, as necessary, and try
charging it again.

- Charge the battery pack in temperatures between approximately 0 °C and 40 °C (32 °F and

104 °F).

- The battery pack is damaged. Use a different battery pack.

appears on the screen

- The LOCK switch on the Eye-Fi card is set to prevent accidental erasure. Change the position

of the LOCK switch.

Summary of Contents for VIXIA HF M40











































































































































































































































































Search results

Summary of Contents for VIXIA HF M40

Reviews:

Related manuals for VIXIA HF M40

Brands by name

Popular brands

Canon VIXIA HF M40, Quick Manual

Search results

Summary of Contents for VIXIA HF M40

Reviews:

Related manuals for VIXIA HF M40

Brands by name

Popular brands