23
Before Downloading Still Images
Mac
int
osh
Before Downloading Still Images
Connecting the Camcorder to a Computer
Be sure to install Photo Application before you connect the camcorder to the
computer.
Make sure the camcorder is being powered using the power adapter before
connecting it to a computer.
Connect the USB cable directly to one of the computer’s main USB ports.
The interface may not function correctly if the camcorder is connected via a
USB hub.
The connection may not operate correctly if you are using other USB
devices, excluding USB mice or keyboards, at the same time. If this occurs,
disconnect the other devices from the computer and try reconnecting the
camcorder.
Do not connect two or more camcorders to the same computer via the USB
interface. The connections may not operate correctly.
Never allow the computer to go into standby (sleep) mode while a
camcorder is connected via the USB interface.
Refer to your computer manual for the location of the computer’s USB ports.
For details about changing settings on the camcorder and connecting the
camcorder to the computer, see the camcorder’s instruction manual.
Settings on the Camcorder
Before connecting the camcorder to the computer, change the following camcorder
settings in advance.
• In the still images index screen, select which still images to play back (built-in
memory or memory card).
• In the [SYSTEM SETUP] menu, set [USB SETTING] to one of the following options.
- [PC/PRINTER]:
To simply connect the camcorder to the computer without further operations.
- [CONNECT&SET]:
Select [PC/PRINTER] on the camcorder every time you connect it to a computer.
CO
PY
