Canon VIXIA HF G30 Instruction Manual Download Page 152

Page: 152 / 189

Appendix: Menu Options Lists

152

[GPS Information Display]

: When the optional GP-E2 GPS Receiver is attached to the camcorder, this

function allows you to view GPS information. For more details, refer to

Viewing GPS Information

in the

receiver's instruction manual.

[Demo Mode]:

The demonstration mode displays the camcorder’s main features. It starts automatically

when the camcorder is powered with the compact power adapter if you leave it turned on without a
memory card for more than 5 minutes.

• To cancel the demo mode once it has started, press any button or turn off the camcorder.

[Firmware]:

You can verify the current version of the camcorder’s firmware. This menu option is usually

unavailable.

[Reset All]:

Resets all of the camcorder's settings.

COP

Summary of Contents for VIXIA HF G30






























































































































































































Search results

Summary of Contents for VIXIA HF G30

Reviews:

Related manuals for VIXIA HF G30

Brands by name

Popular brands

Canon VIXIA HF G30, Instruction Manual

Search results

Summary of Contents for VIXIA HF G30

Reviews:

Related manuals for VIXIA HF G30

Brands by name

Popular brands