PRESET CYCLE MODE
To access the Preset Cycle Mode window, choose ‘Preset Cycle Mode’
under the ‘System Menu’ in the upper left corner of the application
window.
The Preset Cycle Mode can be used to cycle the
VC-C3
camera through
6 presets, one preset at a time.
Using the Preset Cycle Mode:
1. Using the IR Remote or the Control Software, set the preset
positions you want the camera to cycle through. The
VC-C3
camera
will always cycle through ALL six preset positions, whether they have
been defined by the user or not.
2. Using the Set Cycles box, enter a value that will represent the
number of times the VC-C3 camera should cycle through all six
presets.
3. Use the numbered radio buttons to specify the number of seconds
the
VC-C3
camera will remain on each preset.
4. Press Start or Stop to begin or end the preset cycling.
The Accumulated Cycles box will provide feed back as to the number
of completed cycles. (A cycle is when all six presets have been accessed.)
NOTE: The Preset Cycle window’s title will change to reflect the
current preset position the
VC-C3
camera is at while the Preset Cycle
Mode is running.
14
