Canon VB101 User Manual Download Page 32

Page: 32 / 167

Setup Workflow

Once you confirm the operating environment, the VB101 can be used immediately after

initial settings have been made. Make these settings starting with "Initial Setup" (

→

P.33)

followed by "Checking Operation" (

→

P.35).

Note

Install the Web browser on your PC beforehand.

VC-C4

COMMUNICATIO

N CAMERA

f:4-64mm 1:1.4

-2.8

Making initial settings on the VB101

To make initial settings on

the VB101, connect it to a

PC using the cable

supplied with the VB101,

and start up the IP address

setting tool provided on the

supplied CD-ROM.

Network connection

settings are made via an

easy Wizard-style process.

P.33

VC-C4

COMMUNICATI

ON CAMERA

f:4-64mm 1:1.4

-2.8

Confirming Operation

After the initial settings

have been made, the

VB101 must be checked to

be sure it operates

normally. Use the Web

browser to access the

sample page that has been

prepared in advance for the

VB101.

P.35

Summary of Contents for VB101








































































































































































Search results

Summary of Contents for VB101

Reviews:

Canon VB101, User Manual, Page: 32 / 167

Search results

Summary of Contents for VB101

Reviews: