manualshive.com logo in svg

Canon VB101, User Manual, Page: 161 / 167

Share
Download
Canon VB101 User Manual Download Page 161

Appendix

161

When a new version of the firmware is released, the firmware can be upgraded remotely. To

upgrade remotely, use the "vbrfu.exe" program on the CD-ROM and the new firmware.

2

1

Obtain the new firmware.

Launch the "vbrfu.exe" program on the enclosed CD-ROM and used

the procedure below to perform the remote upgrade.

Upgrading the Firmware Remotely

     Enter the IP address, user name and password.

     The current version is displayed.

●

Server Address: Camera server IP address

●

HTTP Port : The HTTP port No. of the camera server 
(Default setting = 80)

●

Administrator Name: Server administrator user name

●

Administrator Password: Server administrator password

     Store the downloaded firmware in 

flash ROM.

     Specify the firmware file to be downloaded to the server.

(5) The completion window appears.

1

2

3

4

Visit the following Web site (URL:http://www.canon.com/webview) for the latest

information on new firmware.

Using the Enclosed Software

c

Note

Do not turn the VB101 off until the completion window appears. Turning the

VB101 off before the completion window appears may prevent the VB101 from

starting up properly.

Summary of Contents for VB101








































































































































































Reviews:

No comments