manualshive.com logo in svg

Canon Satera LBP-3910, User Manual, Page: 40 / 97

Share
Download
Canon Satera LBP-3910 User Manual Download Page 40

 

39

 

Loading Paper in the Multi-purpose Tray

 

Load paper in the multi-purpose tray. The paper loading procedure varies 
depending on the paper type. Refer to the respective procedures for each paper 
type.

 

•

 

Plain Paper, Heavy Paper, Transparency, Label (See "When Loading Paper (Other 
than Postcards and Envelopes)," on p. 39)

 

•

 

Postcard, Envelope (See "When Loading Postcards or Envelopes," on p. 46)

IMPORTANT

 

For more details on the usable paper, see "Usable Paper," on p. 9.

 

When Loading Paper (Other than Postcards and 
Envelopes)

 

Perform the following procedure to load plain paper, heavy paper, transparencies, 
or labels in the multi-purpose tray.

Load paper in portrait or landscape orientation. Depending on the size of the paper 
to be loaded, the loading orientation differs as follows:

Ex. A3

Ex. A4

Landscape orientation

Portrait orientation

Paper that can be loaded in portrait orientation: 
A3, B4, A4R, Ledger (11 x 17), Legal, LetterR

Paper that can be loaded in landscape orientation: 
A4, B5, A5, Letter, Executive

Summary of Contents for Satera LBP-3910


































































































Reviews:

No comments