manualshive.com logo in svg

Canon Satera LBP-3910, User Manual, Page: 47 / 97

Share
Download
Canon Satera LBP-3910 User Manual Download Page 47

 

46

IMPORTANT

 

Be sure to align the paper guides with the width of the paper. If the paper guides 
are too loose or too tight, this may result in misfeeds or paper jams.

 

When Loading Postcards or Envelopes

 

You can load postcards at sizes of Postcard, Reply postcard, 4 on 1 postcard, and 4 
on 1 postcard recommended by Canon, and envelopes at sizes of YOUGATA No. 4, 
YOUGATA No. 2, and KAKUGATA No. 2 in the multi-purpose tray. Use the following 
procedure when loading postcards or envelopes in the multi-purpose tray.

 

NOTE

 

This printer can print plain paper (60 - 105 g/m

 

2

 

) or heavy paper (106 - 199 g/m

 

2

 

) at sizes 

of Postcard, Reply postcard, and 4 on 1 postcard. When printing plain paper or heavy 
paper at a size of Postcard, Reply postcard, or 4 on 1 postcard, see "When Loading 
Paper (Other than Postcards and Envelopes)," on p. 39.

 

1

 

Open the multi-purpose tray.

 

Holding the silver opening at the center of the printer, open the multi-purpose 
tray.

Summary of Contents for Satera LBP-3910


































































































Reviews:

No comments