Canon S110 NIR, User Manual

Page: 21 / 40

Pre-flight checklist:
1. Check remaining space on SD card and install it into
camera.
2. Set/check camera date/time.
3. Select
C
on the mode dial (or any desired custom set-
tings).
4. Remove the S110 camera’s battery².
5. Place the camera’s dial lock on.
6. Check/clean lens.
7. Plug the S110 camera into the eBee .
8. Connect the eBee ’s battery.
9. Connect to the eBee with eMotion .
10. Verify that the right camera model is selected in eMo-
tion .
3 Launching the eBee
The take-off procedure is the same as described in your eBee User Man-
ual. Nevertheless, the S110 camera is slightly heavier (+20 grams / 0.7 oz)
than the drone’s default payload. Therefore, be sure to launch the eBee
with a good initial speed against the direction of the wind.
² Not applicable if your eBee serial number starts with EB-01- .
21