Canon ReallS SX80 User Manual Download Page 22

Page: 22 / 148

Part Names

Main Unit of Projector

■

Front Side

■

Rear Side

Terminals and
connectors

Infrared remote receiver (

P28

)

Lens

Ranging window

Adjustable foot lock button (

P33

)

Anti-theft lock hole

An anti-theft wire cable available on the mar-
ket can be connected.

Lens cap (

P20

)

• Do not place any obstacle between

the projector and the screen, as the
auto focusing function may fail to
operate correctly.

• Be sure to remove the lens cap dur-

ing projection. Failure to do so will
result in cap deformation or fire haz-
ards.

Caution

Speaker

Top control (

P26

)

Cooling fan exhaust vents

Infrared remote receiver (

P28

)

Do not block the air exhaust. Failure to
do so will result in malfunctions or fire
hazards.

Caution

Power cord connector (

P42

)

Top control (

P26

)

Summary of Contents for ReallS SX80





















































































































































Search results

Summary of Contents for ReallS SX80

Reviews:

Related manuals for ReallS SX80

Brands by name

Popular brands

Canon ReallS SX80, User Manual

Search results

Summary of Contents for ReallS SX80

Reviews:

Related manuals for ReallS SX80

Brands by name

Popular brands