Canon REALiS WUX4000 D, User Manual

Page: 34 / 188

Part Names
34
Input Terminal
(1)LAN port ( P132 )
Connects the LAN cable.
Used to connect the projector to a network.
(2)ANALOG PC / COMPONENT IN Terminal
( /COMPONENT IN) ( P39 , P43 )
Receives the analog PC signal (Analog PC).
A component cable can be used to receive the component image signal (Component).
(3)DVI-D IN Terminal ( DVI-D IN) ( P40 )
Connects the external monitor output from a computer.
Receives the digital signal (Digital PC).
(4)HDMI IN Terminal (HDMI IN) ( P41 )
Receives the digital content image signal (HDMI).
Carries both video and audio signals across a single cable.
(5)Service Port (CONTROL)
This terminal is used by servicing technicians. It is not used during ordinary use.
(6)AUDIO IN Terminal (AUDIO IN) ( P39 , P40 , P43 )
Receives the audio input corresponding to 2 image input systems other than HDMI IN.
The internal speaker outputs the audio signal for the selected image signal.
(7)AUDIO OUT Terminal ( AUDIO OUT) ( P41 , P44 )
Outputs the audio to external AV equipment. This outputs the audio signal that corre-
sponds to the projected image signal.
(1) (2)
(3) (4) (5) (6) (7)